Pricelist
Membranes
Model | Description | Price (EUR) |
Vapor barrier film ALU-FLEX | ALU-FLEX vapor barrier film is a film structure consisting of three layers: the middle in the form of a reinforcing grid with built-in polypropylene fibers, as well as two outer layers of polyethylene with the addition of a thin metalized layer. Roll size: 1.5m x 50 m = 75 m² | 30,38 |
Roofing membrane Fakro Eurotop N15 | Fakro Eurotop N-15 waterproofing film consists of three layers: the outer layer is the main element of the material and is an obstacle to water penetration, the middle layer is a “breathable” membrane, the third white inner layer protects the membrane from mechanical damage and increases the protection of the material as a whole. Acts in a number of roofing films as a hydro-barrier or as it is also called waterproofing for the roof. Roll size: 1.5m x 50 m = 75 m² | 42,47 |
Three-layer vapor barrier film ML 90 AL | Vapor barrier film ML 90 AL is a film structure consisting of three layers: the middle in the form of a reinforcing grid with embedded polypropylene fibers, as well as two outer layers of polyethylene with the addition of a thin metalized layer. Roll size: 1.5m x 50 m = 75 m² | 38,87 |
Roof vapor barrier membrane Vapor Regulator 110 g/m² | The vapor barrier film Vapor Regulator 110 is a three-layer membrane, a reinforcing layer in the form of a mesh of polyethylene fibers, two layers of polyethylene film. Roll size: 1.5m x 50 m = 75 m² | 51,61 |
Superdiffusion membrane Dachowa 3 150 g/m² | The newest waterproofing film DACHOWA 3 150 g/m² is a three-layer film structure made of non-woven polypropylene, formed by the action of an electrostatic field, as a result of which the membrane has a specialized lower polypropylene interlayer. It is this ball that performs the function of additional and reliable protection of the next, that is, the middle, second highly vapor-permeable active layer. Roll size: 1.6m x 50 m = 80 m² | 65,01 |
Construction chemicals
Model | Description | Price (EUR) |
Hard wax oil OSMO HARTWACHS-OL ORIGINAL | OSMO HARTWACHS-OL ORIGINAL hard wax oil for floors and wood products is a special colorless, organic-borne wax oil for interior use. Recommended for finishing protective finishing of solid boards, parquet boards, parquet, cork floors, OSB boards, as well as furniture and glued wood products. | 44,10 |
Thinner Hammerite Brush Cleaner & Thinners 0.25l | Thinner Hammerite Brush Cleaner & Thinners – intended for thinning Hammerite protective paints for metal and NO.1 Rustbeater primer paint. Also suitable for cleaning tools and removing oil, grease, and paint stains from dirty surfaces. The thinner is not suitable for use with water-borne products or products based on nitro-solvents. When thinning paints, observe the quantities specified in the instructions for use of the products. | 5,19 |
Tytan universal foam glue, 750 ml | Universal foam glue is designed for gluing insulation and decorative elements inside and outside the premises. | 6,53 |
Degreaser POR-15 Marine Clean 3.78 l | MARINE CLEAN cleans and degreases with just one application, leaving no residue on the surface. Contains no harmful vapors or flammable substances. | 26,13 |
Weber R4 duo concrete repair mix, 20kg | Mix for repair work (structural concrete and concrete structures of medium and high strength), leveling before waterproofing outside and inside buildings. (class R4/M2/PCC according to TS-EN 1504-3) | 22,70 |
Underfloor heating
Model | Description | Price (EUR) |
Heating mat Warme Twin Mat 2.5 m²/375 W (WTM 375) | Warme Twin Mat is a thin two-core shielded heating cable, pre-fixed on a polymer mesh. Factory-connected with cold installation cable for connection to the thermostat. Ideal for comfortable floor heating directly under the tiles. It can be used for both residential and other premises. | 112,80 |
Double-core heating mat Extherm 135 W 0.75 m² (ET ECO 075-180) | Twin-core heating mats of the ET ECO series are designed to maintain a comfortable temperature or to heat rooms. Installation of heating mats is carried out directly under the floor covering (tiles, laminate, etc.). The thickness of the heating mats is only 3 mm, which ensures a minimum increase in floor height. The floor temperature is controlled by an electronic thermostat with a temperature sensor. | 95,81 |
Comfort Heat CTAV-18 two-core heating cable 600 W 34 m | The extremely thin heating cable CTAV-18 is used in thin concrete structures of common floors, during the reconstruction of old floors (for main, additional, and accumulation heating), for heating cold zones near display windows. Two-core heating cable CTAV-18 with a power of 18 W/m is shielded with aluminum foil and tinned copper. An extremely thin heating cable (with memory function) is used in thin concrete structures of familiar floors, in the reconstruction of old floors (for main, additional, and accumulation heating), for heating cold zones near display windows. | 120,15 |
Heating cable Warme Twin Flex Cable 5 m/75 W (WTFC 75) | Warme Twin Flex Cable is a thin two-conductor shielded heating cable. Factory-connected with cold installation cable for connection to the thermostat. Ideal for comfortable floor heating directly under the tiles. It can be used for both residential and other premises. | 34,59 |
Uponor Heating Mat Comfort E Cable Mat 160-1 (1088656) | Uponor Comfort E electric underfloor heating is designed for your personal comfort no matter what your surroundings. It will give you the pleasant sensation of touching a warm surface after getting out of bed or taking a shower. Quick and easy installation thanks to ready-made kits: the shielded heating cable is already attached to the mat of the required area and hermetically sealed with foil or foil. | 118,58 |
Wood
Model | Description | Price (EUR) |
Dry planed board | Used for: roof battens, decorative beams, fencing, terraces lining, furniture production. Advantages of use: high strength, environmental friendliness, aesthetics, durability, practicality. | 1,24 – 4,97 |
Edged board | Used for: the construction of residential buildings, the installation of wooden arbors, the construction of outbuildings, the arrangement of baths, the automotive industry, furniture production, laying wooden floors. Benefits of use: environmental friendliness, durability, wear resistance, availability. | 245,00 |
Edged timber | It is used to create glued and profiled beams, the construction of saunas and baths, the installation of gazebos in the local area, the creation of floor beams, rafters and stair supports, the construction of cottages and townhouses. Advantages of use: fire resistance, environmental friendliness; good thermal insulation, resistance to damage, low shrinkage, natural protection from bugs, excellent air permeability, decorative uniformity of the structure. | 0,52 – 251,53 |
Wooden lining | Used for wall cladding, baths, and saunas, ceiling cladding, loggias, and balconies. Advantages of use: environmental friendliness, durability, aesthetics, ease of installation and processing, good heat and sound insulation; availability. | 9,15 – 22,87 |
Floor board | Advantages of use: environmental friendliness, good noise, and heat insulation, durability, pleasant tactile sensations, accessibility, ease of installation. | 12,74 – 17,97 |
Metal
Model | Description | Price (EUR) |
Steel sheet perforated | An expanded metal sheet is an all-metal product, a sheet with a corrugated surface and cells evenly spaced on this surface, forming a pattern of scales. | 0,92 |
Steel square | A steel square is used as a blank for subsequent processing into section and shaped steel, as well as for the manufacture of various machine parts (shafts, spindles, pushers, plungers, bushings, axles) | 0,89 – 1,41 |
Armature | Reinforcement – high-quality rolled metal, manufactured by hot rolling from carbon and low-alloy steel. It has the appearance of rods, smooth or corrugated, depending on the class. Corrugation is performed at a specific angle. Class A-I – a rod with a smooth surface. A-II, A-III – periodic profile bar reinforcement with uniform corrugation, the task of which is to improve adhesion to concrete. Steel for production can undergo heat treatment (hardening) in order to increase the strength characteristics of the metal. The fittings have found wide application in various fields of construction and manufacture of metal structures. | 0,79 |
Metal mesh | The mesh is formed of wires located in two mutually perpendicular directions and welded at their intersection by spot welding. The meshes are characterized by the size of the side of the cell along the axes of the wires and the diameter of the wire. The size of the side of the mesh cell is the distance between the axes of adjacent longitudinal and transverse wires. The periodic profile provides a high coefficient of friction, which is especially important when using mesh in construction when reinforcing screeds and brickwork | 1,02 – 3,65 |
Steel profile pipes | This is an industrial product based on a hollow circular profile of constant cross-section. Pipes are manufactured industrially, from metals and alloys, organic materials (plastics, resins), concrete, ceramics, glass, wood, and their compositions. Pipes are used to transporting various media, insulate or group other wires. The metal pipe is widely used in construction as a structural profile, in mechanisms – as a shaft for transmission of rotation. | 1,08 |
Metal
Model | Description | Price (EUR) |
Steel sheet perforated | An expanded metal sheet is an all-metal product, a sheet with a corrugated surface and cells evenly spaced on this surface, forming a pattern of scales. | 0,92 |
Steel square | A steel square is used as a blank for subsequent processing into section and shaped steel, as well as for the manufacture of various machine parts (shafts, spindles, pushers, plungers, bushings, axles) | 0,89 – 1,41 |
Armature | Reinforcement – high-quality rolled metal, manufactured by hot rolling from carbon and low-alloy steel. It has the appearance of rods, smooth or corrugated, depending on the class. Corrugation is performed at a specific angle. Class A-I – a rod with a smooth surface. A-II, A-III – periodic profile bar reinforcement with uniform corrugation, the task of which is to improve adhesion to concrete. Steel for production can undergo heat treatment (hardening) in order to increase the strength characteristics of the metal. The fittings have found wide application in various fields of construction and manufacture of metal structures. | 0,79 |
Metal mesh | The mesh is formed of wires located in two mutually perpendicular directions and welded at their intersection by spot welding. The meshes are characterized by the size of the side of the cell along the axes of the wires and the diameter of the wire. The size of the side of the mesh cell is the distance between the axes of adjacent longitudinal and transverse wires. The periodic profile provides a high coefficient of friction, which is especially important when using mesh in construction when reinforcing screeds and brickwork | 1,02 – 3,65 |
Steel profile pipes | This is an industrial product based on a hollow circular profile of constant cross-section. Pipes are manufactured industrially, from metals and alloys, organic materials (plastics, resins), concrete, ceramics, glass, wood, and their compositions. Pipes are used to transporting various media, insulate or group other wires. The metal pipe is widely used in construction as a structural profile, in mechanisms – as a shaft for transmission of rotation. | 1,08 |
Sanitary equipment
Model | Price (EUR) |
Faucets | 37,69 – 1854,51 |
Washbasins | 76,41 – 725,76 |
Toilet bowls | 142,60 – 1744,44 |
Bidet | 95,34 – 961,14 |
Heated towel rails | 57,91 – 666,22 |
Textile
Model | Description | Price (EUR) |
Woven geotextile Kortex | It is a modern geotextile that has a high degree of tear resistance. This material is used as a reinforcing element in the foundations of pile structures, as well as for stabilization and strengthening of soils in industrial and civil construction. Geotextile is resistant to ultraviolet light and aggressive chemical environments. It can be operated for a long time. | 19,46 |
Woven geotextile Stabilenka | Stabilenka woven geotextile has many unique technical characteristics and is used to solve the most difficult problems for the reinforcement of roadways and hydraulic structures. It is a very durable material that is resistant to ultraviolet light, bio-irritants, and acidic environments. The use of this material significantly increases the service life and minimizes current repairs. | 34,15 |
Nonwoven geotextile TYPAR SF | TYPAR SF is used in works related to soil separation in horticulture and landscape design, for the arrangement of a drainage system, in the construction of roads, underground structures, and overground buildings. | 5,06 |
Geotextile Avantex | It is a very durable material that can be installed without additional reinforcement because it is resistant to decay and decay. It has a long service life and is widely used in landscaping works. It can be laid on the ground intended for growing garden plants, hedges, for organizing flower beds in a park area. The fabric is excellent for water and air permeability and prevents weeds from growing. Geotextiles are also used for road construction in parking, sports, and driveways for soil stabilization. | 7,00 |
Non-woven thermally-bonded geotextile TERRAM | TERRAM thermally bonded nonwoven geotextile is a geosynthetic fabric made in a special way. TERRAM is widely used in construction works for strengthening foundations, hydraulic and drainage structures, as well as for strengthening the soil in parks and landscape areas. Such material is very easy to install and resistant to mechanical damage. It is a durable textile that perfectly responds to humid and aggressive chemical environments, therefore it is used in pipeline laying and construction of hydraulic structures. | 6,47 |